Subaru 2009 Tribeca User Manual download pdf (Page 232)

6-22 Interior equipment

& Position of rear view camera

It is attached to the rear gate.

& How to use the rear view

camera

! To display the rear view camera

image

When the selector lever is set to “R”, the

rear view camera automatically displays

the rear view image from the vehicle.

When the lever is set to other positions,

the image before setting to “R” is dis-

played.

1. Set the ignition switch to “ON”.

2. Set the selector lever to “R”.

NOTE

. The image of the rear view camera

has priority over other screen displays.

. The image of the rear view camera is

horizontally reversed as is the case

with the vehicle rearview mirror or the

side view mirror.

. If the lens of the camera is dirty, it is

difficu lt to see the image. Carefully

remove the raindrops, snow and dirt if

they are attached.

. It is difficult to see the image of the

rearview mirror in the following cases.

This is not a malfunction of the camera.

. The image may become poor

when the vehicle is in a dark place

(at night, in a tunnel, etc.) or an

extremely hot or cold place. This is

not a malfunction.

. Strong light shined directly on the

camera lens may develop white

light stripes on the image. This is

not a malfunction.

. While the rear view camera is in

operation, the operations of other

screens are disabled. To operate other

screens, set the selector lever to a

position other than “R”. (vehicles with

a genuine SUBARU navigation system)

& Viewing range on the screen

! Viewing range on the screen

Range of view

Range of view

1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 410 411

Comments to this Manuals

No comments