Subaru 2009 Tribeca User Manual download pdf (Page 59)

8. Push and pull the child restraint

system forward and from side to side to

check if it is firmly secured.

Sometimes a child restraint can be more

firmly secured by pushing it down into the

seat cushion and then tightening the

seatbelt.

9. Pull at the shoulder portion of the belt

to confirm that it cannot be pulled out (ALR

properly functioning).

10. To remove the child restraint system,

press the release button on the seatbelt

buckle and allow the belt to retract

completely. The belt will return to the

ELR mode.

WARNING

NEVER INSTALL A REARWARD FA-

CING CHILD SEAT IN THE FRONT

PASSENGER’SSEAT.DOINGSO

RISKS SERIOUS INJURY OR DEATH

TO THE CHILD BY PLACING THE

CHILD’S HEAD TOO CLOSE TO THE

SRS AIRBAG.

NOTE

When the child restraint system is no

longer in use, remove it and restore the

ELR function of the retractor. That

function is restored by retracting the

seatbelt fully.

! Installing forward facing child re-

straint

1. Sli de the seat or seat p ai r t o i t s

rearmost position.

2. Adjust the seatback to the up right

position.

3. Place the child restraint system in the

seating position.

4. Run the lap and shoulder belt through

or around the child restraint system

following the instructions provided by its

manufacturer.

Seat, seatbelt and SRS airbags 1-35

– CONTINUED –

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 410 411

Comments to this Manuals

No comments