Subaru 2009 Tribeca User Manual download pdf (Page 114)

2-18 Keys and doors

To exit valet mode, change the setting of

your vehicle’s alarm system for activation

mode. Refer to “Activating and deactivat-

ing the alarm system” in this section.

& Passive arming

When passive arming mode has been

programmed by the dealer, arming of the

system is automatically accomplished

without using the remote transmitter. Note

that in this mode, DOORS MUST BE

MANUALLY LOCKED.

! To enter the passive mode

If you wish to program the passive arming

mode, have it done by your SUBARU

dealer.

! Arming the system

CAUTION

In passive mode, the system will

automatically activate the alarm but

WILL NOT automatically lock the

doors. In order to lock the doors

you must either lock them as in-

dicated in step 4 below or with the

key once they have been closed.

Failure to lock the doors manually

will result in a higher security risk.

1. Turn the ignition switch to the “ON”

position.

1) LOCK

2) ON

2. Turn the ignition switch from “ON” to

“LOCK” position and remove the key from

the ignition switch.

3. Open the doors and get out of the

vehicle.

4. Before closing the doors, lock all doors

with the inside door lock levers.

5. Close the doors. The system will

automatically arm after 1 minute.

In the passive mode, the system can also

be armed with the remote transmitter or

with the power door locking switches. If

the r emote transmitter or power door

locking switch is used to lock the vehicle,

arming will take place immediately regard-

less of whether or not the passive mode

has been selected.

! Disarming the system

To disarm the system, briefly press the

“

” button on the transmitter.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 410 411

Comments to this Manuals

No comments