Subaru 2009 Tribeca User Manual Page 370

  • Download
  • Add to my manuals
  • Print
  • Page
    / 411
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 369
11-46 Maintenance and service
& Rear combination lights
1. Remove the two covers by inserting
the tip of a flat-head screwdriver.
2. Using a Phillips screwdriver, remove
the upper and lower screws. Then, slide
the rear combination light assembly rear-
ward and remove it from the vehicle.
1) Brake/tail light
2) Rear turn signal light
3. Remove the bulb holder from the rear
combination light assembly by turning it
counterclockwise.
4. Remove the bulb from the socket by
pushing it and turning counterclockwise.
5. Install a new bulb.
6. Set the bulb holder into the rear
combination light assembly and turn it
clockwise until it locks.
7. Reinstall the rear combination light
assembly by sliding the two-pronged part
of the combination light assembly securely
to each holder of the vehicle side.
8. Tighten the two mounting screws, and
then close the covers.
Page view 369
1 2 ... 365 366 367 368 369 370 371 372 373 374 375 ... 410 411

Comments to this Manuals

No comments