Subaru 2009 Tribeca User Manual download pdf (Page 228)

6-18 Interior equipment

4. Using both hands, simultaneously

push the h and-held tran smitter button

and the desired HomeLink® button. DO

NOT release the buttons until step 5 has

been completed.

5. Hold down b oth buttons until the

HomeLink® indicator ligh t flashes, first

slowly then rapidly. When the indicator

light flashes rapidly, both buttons may be

released. (The rapidly flashing light indi-

cates successful programming of the new

frequency signal.)

6. Press and hold the programmed but-

ton and check the HomeLink® indicator

light. If the indicator light stays on con-

tinuously, your garage door should acti-

vate and the programming is completed.

If the indicator light flashes rapidly for 2

seconds and then stays on continuously,

your garage door opener may be pro-

tected by a rolling code feature. In this

case you need to perform the additional

steps for “Programming rolling-code-pro-

tected garage door openers in the U.S.A.”

described in the following.

NOTE

Rolling-code-protected garage door

openers are manufactured after 1996.

See the instruction manual of your

garage opener for confirmation.

7. Reconnect the motor of your garage

door opener to the outlet.

8. Test your garage door opener by

pressing the programmed HomeLink®

button.

& Programming rolling-code-

protected garage door open-

ers in the U.S.A.

If your garage door opener has a rolling

code feature, program the HomeLink®

Wireless Control System for it by following

steps 1 through 5 in the “Garage door

opener programming in the U.S.A.” sec-

tion above and then continuing with the

steps below.

NOTE

The assistance of a second person

may make the programming quicker

and easier.

1. Locate the training button on the

garage doo r opener motor head unit.

The exact location and color of the button

may vary by brand of garage door opener.

If it is difficult to locate the training button,

refer to your garage door opener’s instruc-

tion manual.

1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 410 411

Comments to this Manuals

No comments