Subaru 2009 Tribeca User Manual download pdf (Page 58)

1-34 Seat, seatbelt and SRS airbags

& Installing child restraint sys-

tems with A/ELR seatbelt

WARNING

. Child restraint systems and seat-

belts can become hot in a vehicle

that has been closed up in sunny

weather; they could burn a small

child. Check the child restraint

system before you place a child

in it.

. Do not leave an unsecured child

restraint system in your vehicle.

Unsecured child restraint sys-

tems can be thrown around in-

side of the vehicle in a sudden

stop, turn or accident; they can

strike and injure vehicle occu-

pants as well as result in serious

injuries or death to the child.

CAUTION

When you install a child restraint

system, follow the manufacturer’s

instructions supplied with it. After

installing the child restraint system,

check to ensure that it is held

securely in position. If it is not held

tight and secure, the danger of your

child suffering personal injury in the

event of an accident may be in-

creased.

! Installing a rearward facing child

restraint

1. Slide the seat or seat pair to its

rearmost position.

2. Adjust the seatback to the upright

position.

3. Place the child restraint system in the

rear seating position.

4. Run the lap and shoulder belt through

or around the child restraint system

following the instructions provided by its

manufacturer.

5. Insert the tongue plate into the buckle

until you hear a click.

6. Take up the slack in the lap belt.

7. Pull out the seatbelt fully from the

retractor to change the retractor over from

the Emergency Locking Retractor (ELR)

to the Automatic Locking Retractor (ALR)

function. Then, allow the belt to rewind

into the retractor. As the belt is rewinding,

clicks will be heard which indicate the

retractor functions as ALR.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 410 411

Comments to this Manuals

No comments