Subaru 2009 Tribeca User Manual download pdf (Page 157)

When the wiper switch is in the “ ”

position, turn the dial to adjust the operat-

ing interval of the wiper.

The operating interval can be adjusted in

nine steps.

The intermittent operation interval varies

depending on the vehicle speed in any of

the adjustment steps (longer when the

vehicle speed is low; shorter when the

vehicle speed is high).

! Washer

To wash the windshield, push the washer

button at the end of the wiper control lever.

The washer fluid sprays until you release

the washer button. The wipers operate

while you push the button.

NOTE

The windshield washer fluid warning

light illuminates when the washer fluid

level in the tank has dropped to the

lower limit. If the warning light illumi-

nates, refill the tank with fluid. For the

tank refilling method, refer to the

“Windshield washer fluid” section in

chapter 11.

& Rear window wiper and

washer switch

: Washer (accompanied by wiper opera-

tion)

ON: Continuous

INT: Intermittent

OFF: Park

: Washer

! Rear wiper

To turn the rear wiper on, turn the knob on

the end of the wiper control lever upward

to the “INT” or “ON” position.

To turn the wiper off, return the knob on

the end of the lever to the “OFF” position.

With the switch turned to the “ INT”

position, the rear wiper will operate inter-

mittently at intervals corresponding to the

Instruments and controls 3-35

– CONTINUED –

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 410 411

Comments to this Manuals

No comments