Subaru 2009 Tribeca User Manual download pdf (Page 247)

sing the brake pedal repeatedly will toggle

the feature ON or OFF each time.

7. To exit the remote transmi tter and

feature programming mode, turn the igni-

tion switch to the “LOCK ” position, remove

the key from the ignition switch and test

operation of the remote transmitter(s) and

horn confirmation feature.

& System maintenance

! Changing the batteries

The two 3-volt lithium batteries (model

CR-1220) supplied in your remote engine

start transmitter should last approximately

three years, depending on usage. When

the batteries begin to weaken, you will

notice a decrease in range (distance from

the vehicle that your remote engine start

system operates). Follow the instructions

below to change the re mote control

batteries.

1. Carefully pry the remote engine start

transmitter halves apart using a small flat-

head screwdriver.

2. Remove the circuit board from the

bottom half of the case and slide the white

plastic battery holder out from under the

battery tab releasing the batteries. Re-

move the old batteries and replace with

new ones. Be sure to observe the (+) sign

Starting and operating 7-11

– CONTINUED –

1 2 ... 242 243 244 245 246 247 248 249 250 251 252 ... 410 411

Comments to this Manuals

No comments