Subaru 2009 Tribeca User Manual download pdf (Page 315)

4. Tighten the towing hook securely

using a wheel nut wrench.

After towing, remove the towing hook from

the vehicle and stow it in the tool bag.

Put the thread hole cover on the rear

bumper.

WARNING

. Do not use the towing hook

except when towing your vehicle.

. Be sure to remove the towing

hook after towing. Leaving the

towing hook mounted on the

vehicle could interfere with prop-

er operation of the SRS airbag

system in a frontal collision.

Front tie-down hooks:

The front tie-down hooks are located

between each of the front tires and the

front bumper.

Rear tie-down hooks:

The rear tie-down hooks are located near

each of the jack-up reinforcements.

WARNING

Use the rear tie-down hooks only for

downward anchoring. If they are

used to anchor the vehicle in any

other direction, cables may slip off

the hooks, possibly causing a dan-

gerous situation.

& Using a flat-bed truck

This is the best way to transport your

vehicle. Use the following procedures to

ensure safe transportation.

1. Shift the selector lever into the “P”

position.

2. Press the parking brake pedal firmly.

3. Secure the vehicle onto the carrier

properly with safety chains. Each safety

chain should be equally tightened and

care must be taken not to pull the chains

so tightly that the suspension bottoms out.

In case of emergency 9-17

– CONTINUED –

1 2 ... 310 311 312 313 314 315 316 317 318 319 320 ... 410 411

Comments to this Manuals

No comments