Subaru 2009 Tribeca User Manual download pdf (Page 231)

Rear view camera (if

equipped)

When the ignition switch is “ON” and the

selector lever is set to “R”, the rear view

camera automatically displays the rear

view image from the vehicle.

WARNING

. Since the rear view camera uses

a wide-angle lens, the image on

the monitor is different from the

actual view in terms of distance.

. Since the range of the image on

the monitor is limited, you should

always check the rear view with

your eyes and move backward at

a slow speed.

. Do not disassemble or modify the

camera, switch or wiring. If

smoke comes out or you smell

a strange odor, stop using the

rear view camera immediately.

Contact your S UBARU dea ler

for an inspection. Continued use

may result in accident, fire or

electric shock.

CAUTION

. If your vehicle is washed with a

high-pressure washer, d o not

allow water to contact the camera

directly. Entry of water in the

camera lens may result in con-

densation, malfunction, fire or

electric shock.

. Since the camera is a precision

device, do not subject it to strong

impacts. Otherwise, malfunction,

fire or electric shock may occur.

. If mud or snow sticks to or is

frozen on the camera, you must

be very careful removing it .

Otherwise, damage done to the

camera may cause a fire or

electric s hock. Pour lukewarm

water over the camera to remove

mud or ice.

. Do not put a flame close to the

camera or wiring. Otherwise, da-

mage or fire may occur.

. When replacing the fuse, be sure

to use a fuse with the specified

rating. Use of a fuse with a

different rating may result in a

malfunction.

. If the rear view camera is used for

a long time while the engine is

not operated, the battery may

become completely discharged.

NOTE

. Do not wipe the camera with alcohol,

benzine or paint thinner. Otherwise,

discoloration may occur. To remove

contamination, wipe the camera with a

cloth moistened with a diluted neutral

detergent and then wipe it with a dry

cloth.

. When waxing the vehicle, be careful

not to apply the wax to the camera. If it

comes in contact with the camera,

moisten a clean cloth with a diluted

neutral detergent to remove the wax.

. The camera lens has hard coating to

help prevent scratches. However, when

washing the vehicle or cleaning the

camera lens, be careful not to scratch

the camera lens. Do not use a washing

brush directly on the camera lens. The

monitor screen may be adversely af-

fected.

. Strong light shined on the camera

lens may develop white light stripes

around the light source. This is not a

malfunction.

Interior equipment 6-21

– CONTINUED –

1 2 ... 226 227 228 229 230 231 232 233 234 235 236 ... 410 411

Comments to this Manuals

No comments