Subaru 2009 Tribeca User Manual download pdf (Page 285)

3. The crossbar with the 150 LBS Load

Label attached onto it is the front crossbar.

An arrow is marked on the back of the

front crossbar for correct installation.

Install the front crossbar so that the arrow

faces the front of the vehicle.

1) 12 in (300 mm)

4. Install the front crossbar so that the

crossbar end supports are located ap-

proximately 12 in (300 mm) rearward from

the joints between the roof rails and the

front roof rail supports.

1) Lower clamp

2) T-30 torx® head screw

5. Tighten the lo wer clamps onto the

crossbar. Using a torque wrench, loosely

tighten the T-30 torx® head screws.

NOTE

It may be necessary to squeeze the

lower clamp and the end support

together to compress the pads and

gain a better alignment of the pieces

while trying to start the screw. Use care

not to cross-thread the screw in the

insert.

Driving tips 8-15

– CONTINUED –

1 2 ... 280 281 282 283 284 285 286 287 288 289 290 ... 410 411

Comments to this Manuals

No comments