Subaru 2009 Tribeca User Manual download pdf (Page 60)

1-36 Seat, seatbelt and SRS airbags

5. Insert the tongue plate into the buckle

until you hear a click.

6. Take up the slack in the lap belt.

7. Pull out the seatbelt fully from the

retractor to change the retractor over from

the Emergency Locking Retractor (ELR)

to the Automatic Locking Retractor (ALR)

function. Then, allow the belt to rewind

into the retractor. As the belt is rewinding,

clicks will be heard which indicate the

retractor functions as ALR.

8. Before having a child sit in the child

restraint system, move it back and forth

and right and left to check if it is firmly

secured. Sometimes a child restraint can

be more firmly secured by pushing it down

into the seat cushion and then tightening

the seatbelt.

9. Pull at the shoulder portion of the belt

to confirm that it cannot be pulled out (ALR

properly functioning).

Rear seat (5-seater models)/Second-row

seat (7-seater models)

Third-row seat (7-seater models)

10. If the child restraint system requires a

top tether, latch the hook onto the top

tether anchor and tighten the top tether.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 410 411

Comments to this Manuals

No comments