Subaru 2011 Tribeca User Manual download pdf (Page 530)

Black plate (377,1)

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

the rear combination light assembly rear-

ward and remove it from the vehicle.

1) Brake/tail light

2) Rear turn signal light

3. Remove the bulb holder from the rear

combination light assembly by turning it

counterclockwise.

4. Remove the bulb from the socket by

pushing it and turning counterclockwise.

5. Install a new bulb.

6. Set the bulb holder into the rear

combination light assembly and turn it

clockwise until it locks.

7. Reinstall the rear combination light

assembly by sliding the two-pronged part

of the combination light assembly securely

to each holder of the vehicle side.

8. Tighten the two mounting screws, and

then close the covers.

& Back-up light/Tail light

1. Use a flat-head screwdriver to remove

the light cover from the rear gate trim.

1) Tail light

2) Back-up light

Maintenance and service

11-41

– CONTINUED –

11

1 2 ... 525 526 527 528 529 530 531 532 533 534 535 ... 579 580

Comments to this Manuals

No comments