Subaru 2011 Tribeca User Manual download pdf (Page 221)

Black plate (64,1)

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

1-36 Seat, seatbelt and SRS airbags

NOTE

When the child restraint system is no

longer in use, remove it and restore the

ELR mode of the retractor. That mode

is restored by retracting the seatbelt

fully.

! Installing forward facing child re-

straint

1. Slide the seat or seat pair to its

rearmost position.

2. Adjust the seatback to th e upright

position.

3. Place the child restraint system in the

seating position.

4. Run the lap and shoulder belt through

or around the child restraint system

following the instructions provided by its

manufacturer.

5. Insert the tongue plate into the buckle

until you hear a click.

6. Take up the slack in the lap belt.

7. Pull out the seatbelt fully from the

retractor to change the retractor over from

the Emergency Locking Retractor (ELR)

to the Automatic Locking Retractor (ALR)

function. Then, allow the belt to rewind

into the retractor. As the belt is rewinding,

clicks will be heard which indicate the

retractor functions as ALR.

8. Before having a child sit in the child

restraint system, try to move it back and

forth and right and left to check if it is firmly

secured. Sometimes a child restraint can

be more firmly secured by pushing it down

into the seat cushion and then tightening

the seatbelt.

9. Pull at the shoulder portion of the belt

to confirm that it cannot be pulled out (ALR

properly functioning).

1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 579 580

Comments to this Manuals

No comments