Subaru 2011 Tribeca User Manual download pdf (Page 395)

100

101

Black plate (240,1)

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

6-20 Interior equipment

trol System and your garage door opener

should activate when the HomeLink

button is pressed.

& Programming for entrance

gates and garage door open-

ers in Canada

1. Unplug the motor of the entrance gate

or garage door opener from the outlet.

2. Press and hold the two outside buttons

until the HomeLink

indicator light begins

to flash (after 20 seconds). Release both

buttons.

NOTE

If any of the HomeLink

buttons are

already programmed for other devices,

skip step 2 because it clears the

memory of all three buttons.

3. Hold the end of the entrance gate’s/

garage door opener’s hand-held transmit-

ter between 1 and 3 inches (25 and 76

mm) away from the HomeLink

buttons on

the driver’s sun visor, keeping the indica-

tor light in view.

4. Press and hold the desired

HomeLink

button.

5. Press and release (“cycle”) the hand-

held transmitter button every 2 seconds

until step 6 is complete.

6. When the indicator light flashes slowly

and then rapidly after several seconds,

release both buttons.

7. Plug the motor of the entrance gate/

garage door opener to the outlet.

8. Test your entrance gate/garage door

opener by pressing the programmed

HomeLink

button.

& Programming other devices

To program other devices such as door

locks, home lighting and security systems,

contact HomeLink at www.homelink.com

or call 1-800-355-3515.

& Operating the HomeLink

Wireless Control System

Once programmed, the HomeLink

Wire-

less Control System can be used to

remote-control the devices to which its

buttons are programmed. To activate a

device, simply press the appropriate but-

ton. The indicator light illuminates, indicat-

ing that the signal is being transmitted.

& Reprogramming a single

HomeLink

button

1. Press and hold the HomeLink

button

you wish to reprogram. DO NOT release

the button until step 4 has been com-

pleted.

2. When the HomeLink

indicator light

begins to flash slowly (after 20 seconds),

position the hand-held transmitter of the

device for which you wish to program the

button at 1 to 3 inches (25 to 76 mm) away

from the HomeLink

button surface.

1 2 ... 390 391 392 393 394 395 396 397 398 399 400 ... 579 580

Comments to this Manuals

No comments

Subaru 2011 Tribeca User Manual Page 395

Comments to this Manuals

Related products and manuals for Cars Subaru 2011 Tribeca