Subaru 2011 Tribeca User Manual download pdf (Page 208)

Black plate (51,1)

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

! Adjusting the shoulder belt anchor

height (second-row seats)

The shoulder belt anchor height should be

adjusted to the position best suited for the

passenger. Always adjust the anchor

height so that the shoulder belt passes

over the middle of the shoulder without

touching the neck.

To raise:

Slide the anchor up.

To lower:

Push the release button and slide the

anchor down.

Pull down on the anchor to make sure that

it is locked in place.

WARNING

When wearing the seatbelts, make

sure the shoulder portion of the

webbing does not pass over your

neck. If it does, adjust the seatbelt

anchor to a lower position. Placing

the shoulder belt over the neck may

result in neck injury during sudden

braking or in a collision.

! Unfastening the seatbelt

Push the button on the buckle.

Before closing the door, make sure that

the belts are retracted properly to avoid

catching the belt webbing in the door.

NOTE

1) Holder

With the seatback folded, attach the

tongue plate of each rear/second-row

seatbelt to the corresponding holder.

Do the same also before someone gets

into the third-row seat.

Seat, seatbelt and SRS airbags 1-23

– CONTINUED –

1

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 579 580

Comments to this Manuals

No comments