Subaru 2011 Tribeca User Manual download pdf (Page 226)

Black plate (69,1)

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

4. If your child restraint system is a

flexible attachment type (which uses

tether belts to connect the child restraint

system properly to the lower anchorages),

while pushing the child restraint into the

seat cushion, pull both left and right lower

tether belts up to secure the child restraint

system firmly by taking up the slack in the

belt.

5. Connect the top tether hook to the

tether anchorage and firmly tighten the

tether. For information on how to set the

top tether, refer to “Top tether anchorages”

F1-41.

6. Before seating a child in the child

restraint system, try to move seat back

and forth and left and right to verify that it

is held securely in position.

7. To remove the child restraint system,

follow the reverse procedures of installa-

tion.

If you have any question concerning this

type of child restraint system, ask your

SUBARU dealer.

& Top tether anchorages

Your vehicle is equipped with five top

tether anchorages so that a child restraint

system having a top tether can be

installed in a rear seating position. When

installing a child restraint system using top

tether, proceed as follows, while observing

the instructions by the child restraint

system manufacturer.

Since a top tether can provide additional

stability by offering another connection

between a child restraint system and the

vehicle, we recommend that you use a top

tether whenever one is required or avail-

able.

! Tether anchorage location

! Second-row seat

Three tether anchorages, i.e., ones for the

right, center and left seats, are already

installed on the back of each seatback.

Open the cover flap to use each ancho-

rage.

Seat, seatbelt and SRS airbags 1-41

– CONTINUED –

1

1 2 ... 221 222 223 224 225 226 227 228 229 230 231 ... 579 580

Comments to this Manuals

No comments