Subaru 2011 Tribeca User Manual download pdf (Page 454)

Black plate (301,1)

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

3. Insert the safety pin into the hitch pin

securely.

4. Pull the ball mount to make sure it

does not come off the hitch receiver.

1) Hitch ball installation point

2) Hooks for safety chains

5. Use only a hitch ball that is appropriate

for the ball mount and your trailer. The

hitch ball must be securely installed on the

ball mount.

6. Connect your trailer to the hitch ball.

7. Connect the trailer and the hitch with

safety chains that will hold the trailer’s

maximum gross weight. The chains

should cross under the trailer tongue to

prevent the tongue from dropping onto the

ground in case it should disconnect from

the hitch ball. Allow sufficient slack in the

chains taking tight tur n situations into

account; however, be careful not to let

them drag on the ground.

WARNING

Do not connect safety chains to part

of the vehicle other than the safety

chain hooks.

Hitch harness connector

8. Connect the hitch wire harness’ black

four-pin wire connector to the towing

trailer’s wire harness.

9. Confirm proper function of the hitch

wire harness by individually activating the

brake, right turn signal, left turn signal,

stop, and parking lights on the trailer.

NOTE

Always disconnect the trailer wire har-

ness before launching or retrieving a

Driving tips 8-19

– CONTINUED –

8

1 2 ... 449 450 451 452 453 454 455 456 457 458 459 ... 579 580

Comments to this Manuals

No comments