Subaru 2011 Tribeca User Manual download pdf (Page 502)

Black plate (349,1)

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

Air cleaner element

WARNING

Do not operate the engine with the

air cleaner element removed. The air

cleaner element not only filters

intake air but also stops flames if

the engine backfires. If the air

cleaner element is not installed

when the engine backfires, you

could be burned.

CAUTION

When replacing the air cleaner ele-

ment, use a genuine SUBARU air

cleaner element. If it is not used,

there is the possibility of causing a

negative effect to the engine.

The air cleaner element functions as a

filter screen. When the element is perfo-

rated or removed, engine wear will be

excessive and engine life shortened.

It is unnecessary to clean or wash the

element.

& Replacing the air cleaner

element

Replace the air cleaner element according

to the maintenance schedule in the

“Warranty and Maintenance Booklet”. Un-

der extremely dusty conditions, replace it

more frequently. It is recommended that

you always use genuine SUBARU parts.

1) Connector

2) Clamp

3) Air intake boot

4) Clip

1. Unplug the connector that is attached

to the top of the air cleaner case.

2. Loosen the screw on the clamp and

pull the air intake boot out of the air

cleaner case.

3. Unsnap the two clips holding the air

cleaner case cover.

4. Open the air cleaner case cover and

remove the air cleaner element.

5. Clean the inside of the air cleaner case

and case cover with a damp cloth and

install a new air cleaner element.

Maintenance and service 11-13

– CONTINUED –

11

1 2 ... 497 498 499 500 501 502 503 504 505 506 507 ... 579 580

Comments to this Manuals

No comments