Subaru 2011 Tribeca User Manual download pdf (Page 189)

Black plate (32,1)

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

1-4 Seat, seatbelt and SRS airbags

To adjust the seat cushion angle, pull up

or push down the front end of the control

switch.

! Seat height adjustment (driver’s

seat)

To adjust the seat height, pull up or push

down the rear end of the control switch.

& Memory function (driver’s

seat – if equipped)

Two of your favorite seat positions can be

registered. Register the seat position with

button “1” or “2” and retrieve the seat

position by pressing either button.

The foll owing seat positions can be

registered.

. Forward/backward position of the seat

. Angle of seatback

. Angle of seat cushion

. Height of seat

! Registration of seat position

WARNING

. Never adjust the seat while driv-

ing to avoid the possibility of

loss of vehicle control and of

personal injury.

. Before adjusting the seat, make

sure the hands and feet of rear

seat passengers or luggage are

clear of the adjusting mechan-

ism.

1. With the select lever in the “P” posi-

tion, adjust the seat position.

2. While pressing the “SET” button, press

the desired button “1” or “2”.

3. The chime sounds once, and the seat

position is registered.

! Retrieval of seat position

WARNING

. Never retrieve the seat position

while driving to avoid the possi-

bility of loss of vehicle control

and of personal injury.

. Perform the seat position retrie-

val before driving. Be su re to

confirm that the select lever

position is in the “P” position.

Do not drive until the retrieval of

the seat position is complete.

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 579 580

Comments to this Manuals

No comments