Subaru 2011 Tribeca User Manual download pdf (Page 450)

Black plate (297,1)

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

3. The crossbar with a 150 lbs (68 kg)

load label attached onto it is the front

crossbar. An arrow is marked on the back

of the front crossbar for correct installa-

tion. Install the front crossbar so that the

arrow faces the front of the vehicle.

1) 12 in (300 mm)

4. Install the front crossbar so that the

crossbar end supports are located ap-

proximately 12 in (300 mm) rearward from

the joints between the roof rails and the

front roof rail supports.

1) Lower clamp

2) T-30 torx

®

head screw

5. Tighten the lower clamps onto the

crossbar. Using a torque wrench, loosely

tighten the T-30 torx

®

head screws.

NOTE

It may be necessary to squeeze the

lower clamp and the end support

together to compress the pads and

gain a better alignment of the pieces

while trying to start the screw. Use care

not to cross-thread the screw in the

insert.

Driving tips 8-15

– CONTINUED –

8

1 2 ... 445 446 447 448 449 450 451 452 453 454 455 ... 579 580

Comments to this Manuals

No comments