Subaru 2011 Tribeca User Manual download pdf (Page 451)

Black plate (298,1)

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

8-16 Driving tips

6. Adjust the alignment of the crossbar

on the roof rails, and if available, use a T-

30 torx

®

bit and torque wrench and tighten

the T-30 torx

®

head screws to 30 to 35

lbf·in (3.4 to 4.0 N·m, 0.35 to 0.41 kgf·m) of

torque (or tighten securely with the torx

®

wrench provided).

Rear crossbar:

1) 2 in (50 mm)

Install the rear crossbar so that the cross-

bar end supports are located approxi-

mately 2 in (50 mm) forward from the

joints between the roof rails and the rear

roof rail supports.

Install the rear crossbar in the same

manner as the front crossbar.

CAUTION

Do not carry cargo on the roof when

the crossbars are removed. Lug-

gage on the roof will be thrown

forward or backward in sudden

stops or rapid accelerations, result-

ing in a dangerous road hazard.

NOTE

Before each use of the roof crossbar,

make sure the four T-30 crossbar

clamp screws have been checked,

and retightened if necessary to 35 lbf·in

(4.0 N·m, 0.41 kgf·m), as outlined in

Step #5 above.

& Roof molding and crossbar

(if equipped)

CAUTION

. For cargo carrying purposes, the

roof molding must be used to-

gether with a roof crossbar kit

and the appropriate carrying at-

tachment. Otherwise, damage to

the roof or paint or a dangerous

1 2 ... 446 447 448 449 450 451 452 453 454 455 456 ... 579 580

Comments to this Manuals

No comments