Subaru 2011 Tribeca User Manual download pdf (Page 518)

Black plate (365,1)

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

Windshield washer fluid

CAUTION

Never use engine coolant as washer

fluid because it could cause paint

damage.

If you spray washer fluid on the windshield

but the windshield washer fluid warning

light illuminates or the supply of washer

fluid appears to diminish, add washer fluid

in the tank.

Remove the washer tank filler cap, then

add was her fluid unt il i t r eac hes the

“FULL” mark on the tank.

After adding washer fluid, make sure the

windshield washer fluid warning light has

turned off.

Use windshield washer fluid. If windshield

washer fluid is unavailable use clean

water.

In areas where water freezes in winter,

use an anti-freeze type windshield washer

fluid. SUBARU Windshield Washer Fluid

contains 58.5% methyl alcohol and 41.5%

surfactant, by volume. Its freezing tem-

perature varies according to how much it

is diluted, as indicated in the following

table.

Washer Fluid

Concentration

Freezing

Temperature

30%

10.48F(−128C)

50% −48F(−208C)

100% −498F(−458C)

CAUTION

Never use engine coolant as washer

fluid because it could cause paint

damage.

In order to prevent freezing of washer

fluid, check the freezing temperatures in

the table above when adjusting the fluid

concentration to the outside temperature.

If you fill the reservoir tank with a fluid with

a different concentration from the one

used previously, purge the old fluid from

the piping between the reservoir tank and

washer nozzles by operating the washer

for a certain period of time. Otherwise, if

the concentration of the fluid remaining in

the piping is too low for the outside

temperature, it may freeze and block the

nozzles.

CAUTION

. Adjust the washer fluid concen-

tration appropriately for the out-

Maintenance and service 11-29

– CONTINUED –

11

1 2 ... 513 514 515 516 517 518 519 520 521 522 523 ... 579 580

Comments to this Manuals

No comments