Subaru 2011 Tribeca User Manual download pdf (Page 431)

Black plate (278,1)

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

7-30 Starting and operating

To release the parking brake, hold down

the brake pedal while depressing the

parking brake pedal and slowly releasing

it.

When the parking brake is set while the

engine is running, the brake system

warni ng light illuminates. After starting

the vehicle, be sure that the warning light

has turned off before the vehicle is driven.

Refer to “Brake system warning light” F3-

16.

& Parking tips

When parking your vehicle, always set the

parking brake firmly and put the select

lever in the “P” (Park) position. Always set

the parking brake firmly when parking your

vehicle. Never rely on the transmission

alone to hold the vehicle.

When parking on a hill, always turn the

steering wheel. When the vehicle is

headed up the hill, the front wheels should

be turned away from the curb.

When facing downhill, the front wheels

should be turned into the curb.

Cruise control

Cruise control enables you to maintain a

constant vehicle speed without holding

your foot on the accelerator pedal and it is

operative when the vehicle speed is 25

mph (40 km/h) or more. Make sure the

main switch is turned “OFF” when the

cruise cont rol is n ot in use to avoid

unintentionally setting the cruise control.

NOTE

If you move the cruise control lever or

press the main switch button while

turning the ignition switch “ON”, the

cruise control function is deactivated

and the cruise control indicator light

flashes. To reactivate the cruise control

function, turn the ignition switch back

to the “Acc” or “LOCK” position, and

then turn it again to the “ON” position.

WARNING

Do not use the cruise control under

any of the fo llowing conditions.

These may cause loss of vehicle

control.

. driving up or down a steep grade

. driving on slippery or winding

roads

. driving in heavy traffic

1 2 ... 426 427 428 429 430 431 432 433 434 435 436 ... 579 580

Comments to this Manuals

No comments