Subaru 2011 Tribeca User Manual download pdf (Page 414)

100

101

Black plate (261,1)

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

“R” position or vice versa until

the vehicle has completely

stopped. Such shifting may

cause damage to the transmis-

sion.

. When parking the vehicle, first

securely apply the parking brake

and then place the select lever in

the “P” position. Avoid parking

for a long time with the select

lever in any other position as

doing so could result in a dead

battery.

NOTE

. When the engine coolant tempera-

ture is still low, the automatic transmis-

sion will upshift to higher engine

speeds than when the coolant tempera-

ture is suffi ciently high in order to

shorten the warm-up time and improve

driveability. The gearshift timing will

automatically shift to the normal timing

after the engine has warmed up.

. Immediately after ATF (automatic

transmission fluid) is replaced, you

may feel that the automatic transmis-

sion operation is somewhat unusual.

This results from invalidation of data

which the on-board computer has

collected and stored in me mory to

allow the transmission to shift at the

most appropriate times for the current

condition of your vehicle. Optimized

shifting will be restored as the vehicle

continues to be driven for a while.

& Select lever

: With the brake pedal depressed, shift

while pressing the button in.

: Shift while pressing the button in.

: Shift without pressing the button.

The select lever has four positions, “P”,

“R”, “N”, “D” and also has manual gate for

using “SPORT” mode or manual mode.

1) Select lever button

! P (Park)

This position is for parking the vehicle and

starting the engine.

In this position, the transmission is me-

chanically locked to prevent the vehicle

from rolling freely.

When you park the vehicle, first set the

parking brake fully, then shift into the “P”

position. Do not hold the vehicle with only

the transmission.

To shift the select lever from the “P” to any

other position, you have to depress the

brake pedal fully then push the select

lever button on the lever knob when the

ignition switch is in the “ON” position. This

prevents the vehicle from lurching when it

Starting and operating 7-13

– CONTINUED –

1 2 ... 409 410 411 412 413 414 415 416 417 418 419 ... 579 580

Comments to this Manuals

No comments

Subaru 2011 Tribeca User Manual Page 414

Comments to this Manuals

Related products and manuals for Cars Subaru 2011 Tribeca