Subaru 2011 Tribeca User Manual download pdf (Page 479)

Black plate (326,1)

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

9-16 In case of emergency

After towing, remove the towing hook from

the vehicle and stow it in the tool bag.

Fit the towing hook cover on the bumper.

WARNING

. Do not use the towing hook

except when towing your vehicle.

. Be sure to remove the towing

hook after towing. Leaving the

towing hook mounted on the

vehicle could interfere with prop-

er operation of the SRS airbag

system in a frontal collision.

Rear towing hook:

1. Take out the towing hook, screwdriver

and wheel nut wrench from the on board

tool bag.

2. Pry off the cover on the rear bumper

using a screwdriver, and you will find a

threaded hole for attaching the towing

hook.

3. Screw the towing hook into the thread

hole until its thread can no longer be seen.

4. Tighten the towing hook securely

using a wheel nut wrench.

After towing, remove the towing hook from

the vehicle and stow it in the tool bag.

Put the thread hole cover on the rear

bumper.

WARNING

. Do not use the towing hook

except when towing your vehicle.

. Be sure to remove the towing

hook after towing. Leaving the

towing hook mounted on the

vehicle could interfere with prop-

er operation of the SRS airbag

system in a frontal collision.

Front tie-down hooks:

1 2 ... 474 475 476 477 478 479 480 481 482 483 484 ... 579 580

Comments to this Manuals

No comments