Subaru 2011 Tribeca User Manual download pdf (Page 271)

Black plate (114,1)

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

2-12 Keys and doors

2. Open the key head using a flat-head

screwdriver.

3. Remove the transmitter case from the

key head.

4. Open the transmitter case by releasing

the hooks.

5. Remove the old battery from the

holder.

1) Negative (−) side facing up

6. Replace with a new battery (Type

CR1620 or equivalent) making sure to

install the new battery with the negative

(−) side facing up.

7. Put together the transmitter case by

fitting the hooks on both sides of the case.

8. Put the transmitter case in the key

head and then put together the key head.

9. Reinstall the screw on the key head.

After the battery is replaced, the trans-

mitter must be synchronized with the

remote keyless entry system’s control

unit. Press either the “

” or “ ” button

six times to synchronize the unit.

& Replacing lost transmitters

If you lose a transmitter or want to

purchase additional transmitters (up to

four can be programmed), you should re-

program all of your transmitters for secur-

ity reasons. It is recommended that you

have your dealer program all o f your

transmitters into your system.

! Programming the transmitters

The remote keyless entry system is

equipped with a special code learning

feature that allows you to program new

transmitter codes into the system or to

delete old ones. The system can learn up

to four unique transmitter codes. The four

transmitter codes may be the same or

1 2 ... 266 267 268 269 270 271 272 273 274 275 276 ... 579 580

Comments to this Manuals

No comments