Subaru 2009 Impreza User Manual download pdf (Page 357)

11-42 Maintenance and service

! Type B

1. Raise the wiper arm off the windshield.

1) Open the cover

2) Pull down the wiper blade

2. Remove the wiper blade assembly by

opening the cover and pulling it down in

the direction shown in the illustration.

3. Install the wiper blade assembly to the

wiper arm. Make sure that it locks in place.

4. Hold the wiper arm by hand and slowly

lower it in position.

& Windshield wiper blade rub-

ber (type A and type B)

NOTE

The following illustrations show the

replacement procedures of the blade

rubber for a type A wiper blade assem-

bly, however the replacement proce-

dures are the same for a type B wiper

blade assembly.

1) Metal support

1. Grasp the locked end of the blade

rubber assembly and pull it firmly until the

stoppers on the rubber are free of the

metal support.

1) Metal spines

2. If the new blade rubber is not provided

with two metal spines, remove the metal

spines from the old blade rubber and

install them in the new blade rubber.

3. Align the claws of the metal support

1 2 ... 352 353 354 355 356 357 358 359 360 361 362 ... 406 407

Comments to this Manuals

No comments