Subaru 2009 Impreza User Manual download pdf (Page 259)

switch has been turned to the “ON ”

position.

! Vehicle Dynamics Control warning

light/Vehicle Dynamics Control OFF

indicator light/Traction Control OFF

indicator light

Turbo models

Non-turbo models

This single light has the function of

indicating malfunctions in the Vehicle

Dynamics Control system and the function

of indicating that the Vehicle Dynamics

Control system is not operating or only the

Traction Control system is not operating. It

illuminates in the event of a malfunction in

the system and is illuminated whenever

the system is not operating.

! Vehicle Dynamics Control warning

light (yellow)

Except WRX STI

The warning light illuminates when the

ignition switch is turned to the “ON”

position and turns off several seconds

after engine startup. This lighting pattern

indicates that the Vehicle Dynamics Con-

trol system is operating normally.

WRX STI

The warning light illuminates in yellow for

approximately 1 second when the ignition

switch is turned to the “ON” position. After

that, this warning light changes to green

and remains illuminated in green for 1

second, and then turns off. It indicates that

the Vehicle Dynamics Control system is

operating normally.

The following situations could indicate a

malfunction of the Vehicle Dynamics

Control system; if any should occur, have

an authorized SUBARU dealer carry out

an inspection of the system at the first

available opportunity.

. The warning light does not illuminate

when the ignition switch is turned to the

ON position.

. The warning light illuminates while the

vehicle is being driven.

. When a malfunction has occurred in

the Vehicle Dynamics Control electrical

system, only the warning light will illumi-

nate. In such an event, the ABS will still be

operating normally.

. The warning light will also illuminate

when a problem occurs with the ABS or

Vehicle Dynamics Control electronic con-

trol systems.

Because the Vehicle Dynamics Control

Starting and operating 7-39

– CONTINUED –

1 2 ... 254 255 256 257 258 259 260 261 262 263 264 ... 406 407

Comments to this Manuals

No comments