Subaru 2009 Impreza User Manual download pdf (Page 330)

and genuine SUBARU cool ing system

conditioner whenever the coolant is re-

placed.

Change the engine coolant and add

genuine SUBARU cooling system condi-

tioner using t he following procedures

according to the maintenance schedule.

1. Remove the under cover.

2. Place a proper container under the

drain plug and loosen the drain plug.

3. Loosen the radiator cap to drain the

coolant from the radiator. Then drain the

coolant from the reserve tank. Tighten the

drain plug securely.

NOTE (Turbo model only)

The cap (without tabs) on top of the

radiator does not need to be removed.

To add coolant, remove the cap (with

tabs) on the coolant tank on top of the

engine.

4. Install the under cover.

Non-turbo models

1) Fill up to this level

Turbo models

1) Fill up to this level

5. Slowly pour the coolant and fill up to

just below the filler neck, allowing enough

room to add genuine SUBARU cooling

system conditioner in the radiator. Add

genuine SUBARU cooling system condi-

tioner until the coolant level reaches the

filler neck. Do not pour the coolant too

quickly, as this may lead to insufficient air

bleeding and trapped air in the system.

Maintenance and service 11-15

– CONTINUED –

1 2 ... 325 326 327 328 329 330 331 332 333 334 335 ... 406 407

Comments to this Manuals

No comments