Subaru 2009 Impreza User Manual download pdf (Page 296)

9-8 In case of emergency

Turn the jackscrew by hand until the jack

head engages firmly into the jack-up point.

8. Insert the jack handle into the jack-

screw, and turn the handle until the tire

clears the ground. Do not raise the vehicle

higher than necessary.

9. Remove the wheel nuts and the flat

tire.

10. Before putting the spare tire on, clean

the mounting surface of the wheel and hub

with a cloth.

11. Put on the spare tire. Replace the

wheel nuts. Tighten them by hand.

WARNING

Do not use oil or grease on the

wheel studs or nuts when the spare

tire is installed. This could cause the

nuts to become loose and lead to an

accident.

12. Turn the jack handle counterclockwise

to lower the vehicle.

13. Use the wheel nut wrench to securely

tighten the wheel nuts to the specified

torque, following the tightening order in the

illustration.

The torque for tightening the nuts is 58 to

72 lbf·ft (80 to 100 N·m, 8 to 10 kgf·m).

This torque is equivalent to a pplying

approximately 88 to 110 lbs (40 to 50 kg)

at the top of the wheel nut wrench. Never

1 2 ... 291 292 293 294 295 296 297 298 299 300 301 ... 406 407

Comments to this Manuals

No comments