Subaru 2008 TRIBECA User Manual download pdf (Page 366)

11-44 Maintenance and service

! High beam light bulbs

Right-hand side

1. Use a screwdriver to undo the clips on

the air intake duct, then remove the air

intake duct. (right-hand side)

Left-hand side

2. Use a screwdriver to remove the

secured clip of the washer tank. To make

it easy to access the bulb, move the

washer tank to the horizontal direction.

(left-hand side)

3. Disconnect the electrical connector

from the bulb.

4. Remove the bulb from the headlight

assembly by turning it counterclockwise.

5. Replace the bulb with new one. At this

time , use car e not to touch the bulb

surface.

6. Reconnect the electrical connector.

7. To install the bulb to the headlight

assembly, turn it clockwise until it clicks.

8. Install the air intake duct with clips.

(right-hand side)

9. Set the washer tank to the original

place and secure it by clip. (left-hand side)

& Parking light (right-hand

side)

1. Remove the bulb socket from the

headlight assembly by turning it counter-

clockwise.

1 2 ... 361 362 363 364 365 366 367 368 369 370 371 ... 408 409

Comments to this Manuals

No comments