Subaru 2008 TRIBECA User Manual Page 358

  • Download
  • Add to my manuals
  • Print
  • Page
    / 409
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 357
11-36 Maintenance and service
1. Pull out the end of the blade rubber
assembly to unlock it from the plastic
support.
2. Pull the blade rubber assembly out of
the plastic support.
1) Metal spines
3. If the new blade rubber is not provided
with two metal spines, remove the metal
spines from the old blade rubber and
install them in the new blade rubber.
4. Align the claws of the plastic support
with the grooves in the blade rubber
assembly, then slide the blade rubber
assembly into place.
Securely retain both ends of the rubber
with the stoppers on the plastic support
ends. If the rubber is not retained properly,
the wiper may scratch the rear window
glass.
5. Install the wiper blade assembly to the
wiper arm. Make sure that it locks in place.
6. Hold the wiper arm by hand and slowly
lower it in position.
Page view 357
1 2 ... 353 354 355 356 357 358 359 360 361 362 363 ... 408 409

Comments to this Manuals

No comments