Subaru 2002 Impreza User Manual download pdf (Page 57)

IMPREZA(NA) A1830BE-A (ENGLISH)

Seat, seatbelt and SRS airbags

1-34

You will find marks “Child” at the bottom of the rear

seat seatbacks. These marks indicate the positions

of the lower anchorages (bars).

HB1088BA

Each lower anchorage is located where the seat

cushion meets the seatback.

1. Use the “Child” marks to locate the two lower an-

chorages (bars) for the position where you want to

install the child restraint system.

2. While following the instructions supplied by the

child restraint system manufacturer, connect the

connectors of the child restraint system to the lower

anchorages.

When the connectors are fastened, make sure that

the adjacent seatbelts are not caught.

If your child restraint system is of a flexible attach-

ment type (which uses tether straps to connect the

child restraint system proper to the lower anchor-

ages), firmly tighten the straps after connecting the

connectors.

3. Connect the top tether hook to the tether anchor-

age and firmly tighten the tether.

For information on how to set the top tether, read the

following “Top tether anchorages”.

4. Before seating a child in the child restraint sys-

tem, try to move seat back and forth to verify that it

is held securely in position.

If you have any question concerning this type of

child restraint system, ask your SUBARU dealer.

WARNING

When you install a child restraint system, fol-

low the manufacturer’s instructions supplied

with it. After installing the child restraint sys-

tem, check to ensure that it is held securely in

position. If it is not held tight and secure, the

danger of your child suffering personal injury

in the event of an accident may be increased.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 389 390

No comments

Subaru 2002 Impreza User Manual Page 57