Subaru Impreza 2004 User Manual download pdf (Page 49)

ME(H4DOTC)-48

MECHANICAL

Engine Assembly

(3) Remove the bolts which hold the right upper

side of transmission to engine.

28) Remove the engine from vehicle.

(1) Slightly raise the engine.

(2) Raise the transmission with garage jack.

(3) Move the engine horizontally until the main-

shaft is withdrawn from clutch cover.

(4) Slowly move the engine away from engine

compartment.

NOTE:

Be careful not to damage adjacent parts or body

panels with crank pulley, oil pressure gauge, etc.

29) Remove the front cushion rubbers.

B: INSTALLATION

1) Install the clutch release fork and bearing onto

transmission. (MT model)

(1) Remove the release bearing from clutch

cover with flat type screw driver.

(2) Install the release bearing on transmission.

(3) Install the release fork into release bearing

tab.

(4) Apply grease to the specified points.

• Spline: FX2200

• Shaft: SUNLIGHT 2

(5) Insert the release fork shaft into release

fork.

ME-00050

ME-00051

(A) Release fork

(B) Release bearing

(A) Spline (FX2200)

(B) Shaft (SUNLIGHT 2)

ME-00052

(A)

(B)

ME-00053

(A)

(B)

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 55 56

No comments

Subaru Impreza 2004 User Manual Page 49